MAG250 Remote

MAG250 Remote.

This application uses IrDA by default. If your smartphone doesn’t contain IrDA, you can use Wi-Fi Connectivity feature. This feature is compatible with a firmware version 0.2.18-r5 and higher for STB MAG 250.

In order to get System Settings on MAG 250, remove and plug-in power cable on MAG 250. Then click SETUP button on the original remote control of MAG250 many many times, until the System Settings will not appear.

You have to enable Remote control in System Settings of MAG 250. Set Name and Password for this feature.

RC

IP Address of STB you can find in Network Info:

RC

Firmware Version you can find in Device Info:

RC

Youtube video:

 

 

Ok, go ahead and configure MAG250 Remote.

MAG250 Remote supports autodiscovery, it means that the application finds compatible STBs itself, you just need to select you STB from the list and set Password.

Enjoy! :)

P.S. If the firmware of your MAG 250 is lower than 0.2.18-r5, contact your IPTV service provider for advice to update the firmware.

12 Responses to MAG250 Remote

  1. vladimir says:

    управление приставкой mag-250

  2. You did a really good job. I will recommend your app to my clients

  3. dag inge are says:

    my problem is i left my remote in portugal, and thought i was home safe buying this app for my samsung phone, but now it turns out i still need the original remote to get it to work ?? is there any way to get around this, as my remote is about 6000 km from where i am right now.
    hope for a quik answer
    regards
    dag

    • admin says:

      If your Samsung smartphone has IrDA (S4, S5) you can use this application the same as original remote.
      It doesn’t require original remote. Original remote is required only if your smartphone doesn’t have IrDA and you need it only to enable Remote Control in System Settings of MAG 250.

  4. video sex says:

    I have read some just right stuff here. Definitely worth bookmarking for revisiting. I surprise how a lot effort you put to make such a great informative web site.

  5. Catharine says:

    hi, is there is any chance that u gonna create the same function for iPhone ? Thanks

  6. I used to be able to find good advice from your content.

  7. sok13 says:

    Why irda doesn’t work on g2!
    I cannot find remote menu either!

  8. Jm says:

    Any timeframe on an iOS version?

Leave a Reply to admin Cancel reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>